Find the right answer, faster.
Search WELPING Blog resources across product knowledge, selection, operation, troubleshooting, technical guidance, maintenance and standards.
Knowledge library
Popular questions
Matching knowledge articles
How to Adjust Pressure on A and A Pro Hydraulic Units
A simple step-by-step guide to adjusting hydraulic pressure on A and A Pro butt fusion machine hydraulic units before op
Read original articleOperation Instructions for A-max Butt Welder
The differences between the A-max series butt welding machines and the A series welding machines.
Read original articleHow Drag Pressure Is Read on FX vs. A / A Pro Hydraulic Units
A quick guide to the difference between FX and A / A Pro hydraulic units when measuring drag pressure, including when th
Read original articleHow Clamp Insert Design Changes with Butt Fusion Machine Size
This article explains why clamp insert design changes as butt fusion machine size increases, including differences in co
Read original articleFX Series: Digital vs. Analog Pressure Gauge
A quick comparison of the standard analog pressure gauge and optional digital pressure gauge used on FX Series hydraulic
Read original articleAdvantages of the Weipin Series B Butt Fusion Welding Machine
Welping B-series butt welding machines consist of the frame (including fixtures),facer, heating plate, lifting basket an
Read original articlePreparation and Maintenance Before Operation of PE Pipe Butt Fusion Welding Machine
Before milling the PE pipe orifice, clean it with clean water or a wet wipe to prevent small stones from damaging the fa
Read original articleWhat Size Generator Does a WP315A Butt Fusion Welder Need?
What size generator do you think is required to keep this machine running stably?
Read original articleWhat Does Each Digit on the Barcode of an Electrofusion Fitting Mean?
What does each digit on the barcode of an electrofusion fitting mean?
Read original articleHow to Quickly Replace a Hydraulic Quick Coupler
The hydraulic quick coupler is an important connection component in the hydraulic system of a butt fusion welding machin
Read original articlePE Pipe Execution Standards — Did You Choose the Right One?
PE Pipe - Commonly Used Chinese Execution Standards (Current)
Read original articleHow to Use the PE Butt Fusion Welding Machine?
A PE butt fusion welding machine is used to butt-join pipes directly; it is not for dragging pipes. For example, I welde
Read original articleOn-site Shot of Welding Defects in PE Electrofusion Fittings: Can Such Products Still Be Used?
Do not use electrofusion fittings in case of jetting, short circuit, or other similar abnormal conditions.
Read original articleHow to Connect PE Pipes to Iron Pipes and PPR Pipes
PE pipes cannot be directly heat-fused to PPR or iron pipes. Depending on pipe size and service conditions, use brass-in
Read original articleHow to Install PE Reducing Couplings in Series
Connecting PE reducing couplings in series increases cumulative risk at the joints. If series connection cannot be avoid
Read original articleWhat Type of Fusion Welder Is Suitable for PPR Pipes?
Common hand-held fusion welders for PPR pipes include DN20-32, DN20-63 and DN75-110 models. For PPR pipes larger than DN
Read original articleHDPE Butt Fusion Welding Temperature Chart & Key Parameters
A practical guide to HDPE butt fusion temperature, pressure, heating and cooling parameters. Learn why heater temperatur
Read original articleWhat Should a Large-Diameter PE Pipe Fusion Machine Be Designed to Handle? A Closer Look at the WP800A
This article examines the key design requirements of a large-diameter PE pipe butt fusion machine, using the WP800A as a
Read original articleHow to Choose the Right HDPE Butt Fusion Machine: Understanding A Pro, A Max and FX Series
Compare Welping A Pro, A Max, and FX butt fusion machine series to understand the differences in structure, hydraulic sy
Read original articleRG-2T Outward Groove Forming Process: How a Convex Groove Is Formed on Metal Pipe
RG-2T is designed for inward and outward groove forming on metal pipes. This article explains how a convex groove is for
Read original articleHow to Choose a 1200mm Butt Fusion Welding Machine for Large HDPE Pipes
This article explains how to choose a 1200mm butt fusion welding machine for large PE and HDPE pipe projects. It covers
Read original articleHow the RG-2X Ensures Stable Grooving for Medium to Large Diameter Steel Pipes
The RG-2X roll grooving machine is designed for 2"–12" steel pipes, focusing on stable operation and practical usability
Read original articleOGS vs AGS: Understanding Their Roles in Pipe Grooving
OGS and AGS are two key grooving standards used in pipe connections. While OGS is widely applied in standard pipe sizes,
Read original articlePipe Straps vs Pipe Hangers: What’s the Difference and When to Use Each
Pipe straps and pipe hangers serve different roles in piping systems. Pipe straps are designed for direct surface fixing
Read original articleWhich Welding Machine Is Suitable?
Which welding machine is suitable?
Read original articleOverview of Pipe Support Solutions: Straps, Hangers, and Riser Clamps
This article provides a practical overview of common pipe support solutions, including pipe straps, hangers, and riser c
Read original articleWhat Should I Do If the Hydraulic Butt Welding Machine Fails to Hold Pressure?
What should I do if the hydraulic butt welding machine fails to hold pressure?
Read original articleWhat Are the Consequences of Incorrect Phase Sequence Connection for 380V Three-Phase Power Supply?
What are the consequences of incorrect phase sequence connection for 380V three-phase power supply?
Read original articleFacer Run Automatically
With the 380V hydraulic power unit, the milling cutter begins to move when the forward/reverse valve is actuated.
Read original articleWelping Custom 2000mm Butt Fusion Machine for Large-Diameter Applications
A custom 2000mm butt fusion machine was developed by Welping for large-diameter pipeline applications. The design focuse
Read original articleA PRO Hydraulic Unit – Pressure Adjustment Guide
Step-by-step guide to hydraulic pressure adjustment on A PRO butt fusion machine, ensuring stable operation and correct
Read original articleBoth Electric Hydraulic Pipe Cutters: Choosing Between CM-12 and CM-20
CM-12 and CM-20 are two electric hydraulic pipe cutters designed for different pipe sizes and working environments. Whil
Read original articleCause and Solution for Air in the Hydraulic Hose
Jerky movement of a butt fusion machine may be caused by air trapped in the hydraulic hose. This guide explains the caus
Read original articleWelping Machine Maintenance and Care Manual
Welping Machine Maintenance and Care Manual
Read original articleFX Series Remote Control: Built for Real Jobsite Use
This article introduces the standard remote control used on FX series butt fusion machines. Designed for real jobsite co
Read original articleWhy a Stand with a Scale Improves Batch Grooving Efficiency
A pipe stand with an integrated scale improves batch grooving efficiency by turning manual positioning into reference-ba
Read original articleFX Series Butt Fusion Machine Clamp Configuration
This article explains how clamp configurations vary across FX series butt fusion machines based on pipe size. Models up
Read original articleRecent Shipment Update – Gruvmaster Roll Grooving Machines
A new batch of Gruvmaster roll grooving machines has completed assembly and shipment preparation. From final assembly to
Read original articleA Practical Test and Usage Record of a Pipe Cutting Blade
This article documents a practical evaluation of a pipe cutting blade used on Gruvmaster pipe cutting machines. Based on
Read original articleHow We Understand Roll Grooving Machines Internally
This article records an internal technical discussion on roll grooving machines at Gruvmaster. Through open discussion a
Read original articleApplications of HDPE Butt Fusion Machines in Pipeline Engineering
This article explains the role of HDPE butt fusion machines in pipeline engineering. It outlines the basic fusion princi
Read original articleFX Series Butt Fusion Machines: Practical Standard Accessories
This article explains the standard accessory configuration of FX series butt fusion machines. Beyond core components, th
Read original articleWhy the Frame Rings of FX800 and Larger Butt Fusion Machines Are Finished in Black
FX800 and larger butt fusion machines use black-finished frame rings instead of standard blue due to material and manufa
Read original articleWhat Makes Up a Complete Butt Fusion Welding Machine? FX630 as an Example
A complete butt fusion welding machine includes a main frame, facer, heater, and hydraulic power unit. Using the FX630 a
Read original articleUnderstanding the Frame Design of FX250 and FX315 in the FUSINGX FX Series
The FX250 and FX315 use a unique round-edge steel tube frame, while larger FX models adopt thickened steel plates. This
Read original articleNo matching Blog articles found
Try a broader term such as pressure, maintenance, standards, selection, clamps, gauges or grooving.
Latest knowledge articles
PE Pipe Execution Standards — Did You Choose the Right One?
PE Pipe - Commonly Used Chinese Execution Standards (Current)
Read original articleHow to Use the PE Butt Fusion Welding Machine?
A PE butt fusion welding machine is used to butt-join pipes directly; it is not for dragging pipes. For example, I welde
Read original articleOn-site Shot of Welding Defects in PE Electrofusion Fittings: Can Such Products Still Be Used?
Do not use electrofusion fittings in case of jetting, short circuit, or other similar abnormal conditions.
Read original articleHow to Adjust Pressure on A and A Pro Hydraulic Units
A simple step-by-step guide to adjusting hydraulic pressure on A and A Pro butt fusion machine hydraulic units before op
Read original articleHow Drag Pressure Is Read on FX vs. A / A Pro Hydraulic Units
A quick guide to the difference between FX and A / A Pro hydraulic units when measuring drag pressure, including when th
Read original articleOperation Instructions for A-max Butt Welder
The differences between the A-max series butt welding machines and the A series welding machines.
Read original articleHow Clamp Insert Design Changes with Butt Fusion Machine Size
This article explains why clamp insert design changes as butt fusion machine size increases, including differences in co
Read original articleFX Series: Digital vs. Analog Pressure Gauge
A quick comparison of the standard analog pressure gauge and optional digital pressure gauge used on FX Series hydraulic
Read original articleExplore all 45 Blog guides
Product KnowledgeProduct Knowledge14 articles
How Clamp Insert Design Changes with Butt Fusion Machine Size
Read original articleFX Series: Digital vs. Analog Pressure Gauge
Read original articleAdvantages of the Weipin Series B Butt Fusion Welding Machine
Read original articleWhat Should a Large-Diameter PE Pipe Fusion Machine Be Designed to Handle? A Closer Look at the WP800A
Read original articleHow the RG-2X Ensures Stable Grooving for Medium to Large Diameter Steel Pipes
Read original articleWelping Custom 2000mm Butt Fusion Machine for Large-Diameter Applications
Read original articleFX Series Remote Control: Built for Real Jobsite Use
Read original articleFX Series Butt Fusion Machine Clamp Configuration
Read original articleRecent Shipment Update – Gruvmaster Roll Grooving Machines
Read original articleA Practical Test and Usage Record of a Pipe Cutting Blade
Read original articleFX Series Butt Fusion Machines: Practical Standard Accessories
Read original articleWhy the Frame Rings of FX800 and Larger Butt Fusion Machines Are Finished in Black
Read original articleWhat Makes Up a Complete Butt Fusion Welding Machine? FX630 as an Example
Read original articleUnderstanding the Frame Design of FX250 and FX315 in the FUSINGX FX Series
Read original articleSelection GuideSelection Guide8 articles
What Size Generator Does a WP315A Butt Fusion Welder Need?
Read original articleWhat Type of Fusion Welder Is Suitable for PPR Pipes?
Read original articleHow to Choose the Right HDPE Butt Fusion Machine: Understanding A Pro, A Max and FX Series
Read original articleHow to Choose a 1200mm Butt Fusion Welding Machine for Large HDPE Pipes
Read original articlePipe Straps vs Pipe Hangers: What’s the Difference and When to Use Each
Read original articleWhich Welding Machine Is Suitable?
Read original articleOverview of Pipe Support Solutions: Straps, Hangers, and Riser Clamps
Read original articleBoth Electric Hydraulic Pipe Cutters: Choosing Between CM-12 and CM-20
Read original articleOperation GuideOperation Guide9 articles
How to Adjust Pressure on A and A Pro Hydraulic Units
Read original articleOperation Instructions for A-max Butt Welder
Read original articleHow Drag Pressure Is Read on FX vs. A / A Pro Hydraulic Units
Read original articleHow to Use the PE Butt Fusion Welding Machine?
Read original articleHow to Connect PE Pipes to Iron Pipes and PPR Pipes
Read original articleHow to Install PE Reducing Couplings in Series
Read original articleRG-2T Outward Groove Forming Process: How a Convex Groove Is Formed on Metal Pipe
Read original articleA PRO Hydraulic Unit – Pressure Adjustment Guide
Read original articleWhy a Stand with a Scale Improves Batch Grooving Efficiency
Read original articleTroubleshootingTroubleshooting5 articles
On-site Shot of Welding Defects in PE Electrofusion Fittings: Can Such Products Still Be Used?
Read original articleWhat Should I Do If the Hydraulic Butt Welding Machine Fails to Hold Pressure?
Read original articleWhat Are the Consequences of Incorrect Phase Sequence Connection for 380V Three-Phase Power Supply?
Read original articleFacer Run Automatically
Read original articleCause and Solution for Air in the Hydraulic Hose
Read original articleTechnical GuideTechnical Guide4 articles
What Does Each Digit on the Barcode of an Electrofusion Fitting Mean?
Read original articleOGS vs AGS: Understanding Their Roles in Pipe Grooving
Read original articleHow We Understand Roll Grooving Machines Internally
Read original articleApplications of HDPE Butt Fusion Machines in Pipeline Engineering
Read original articleMaintenanceMaintenance3 articles
Standards & SpecificationsStandards & Specifications2 articles
Cannot find the answer?
Try a broader term, browse all Blog articles, or contact WELPING technical support.