Butt Fusion Machine & Pipe Tool Manufacturer
Troubleshooting
Troubleshooting | On-site Shot of Welding Defects in PE Electrofusion Fittings: Can Such Products Still Be Used?Sep 7,2026Do not use electrofusion fittings in case of jetting, short circuit, or other similar abnormal conditions.- Troubleshooting | What Should I Do If the Hydraulic Butt Welding Machine Fails to Hold Pressure?Apr 7,2026What should I do if the hydraulic butt welding machine fails to hold pressure?
- Troubleshooting | What Are the Consequences of Incorrect Phase Sequence Connection for 380V Three-Phase Power Supply?Mar 31,2026What are the consequences of incorrect phase sequence connection for 380V three-phase power supply?
- Troubleshooting | Facer Run AutomaticallyMar 26,2026With the 380V hydraulic power unit, the milling cutter begins to move when the forward/reverse valve is actuated.
- Troubleshooting | Cause and Solution for Air in the Hydraulic HoseMar 12,2026Jerky movement of a butt fusion machine may be caused by air trapped in the hydraulic hose. This guide explains the cause and shows how to remove air from the hydraulic system step by step.
